Panasonic KX-FL521 - Manual (Page 55)

Erases a specific message
Erases all messages
Changes to TEL mode
Turns ON message transfer
Turns OFF message transfer
Turns ON pager call
Turns OFF pager call
55
Remote Operation
Remote command
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 62) and set the unit to TAD/FAX
mode before going out (p. 50).
Dial key Page Dial key Remote command Page
Skips the greeting message
Repeats a message
Skips a message
New message playback
All message playback
Room monitor
Re-records a greeting message
Stops re-recording of a greeting
message
9
7
6
5
4
2
1
0 57
56
56
56
56
57
57
57 8 4
8 3
8 2
8 1
8 0
5
4 57
57
57
57
57
57
57
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Answering Device
Remote Operation
Notice of Remote Operation
Fold here
1. Call your unit.
2. Enter the remote operation ID
during the greeting
message.
● The new messages will be
played automatically.
● If there are no new
messages, wait for 4
seconds. All the messages
will be played back.
3. Press the remote command
key(s) within 10 seconds (see
the reverse side).
● The remote operation is
available only from a touch tone
telephone when the unit is in
TAD/FAX mode.
● When the unit is in TEL mode,
call your unit and wait for 10
rings. The answering device will
temporarily answer the line.
Enter the remote operation ID
during the greeting message.
The unit will switch to TAD/FAX
mode.
● When you press a key, press
firmly.
● To send a document, press
. When a fax tone is
heard, start transmission.
9
Operating from a remote location !