Polaris Predator 9920779 - Manual (Page 134)

131
MAINTENANCE AND LUBRICATION
Battery Installation
1. Set the battery in the battery holder.
2. Connect and tighten the red (positive) cable first, then connect and tighten the black
(negative) cable.
3. Attach the hold-down strap and reinstall the rear cab.
4. Verify that cables are properly routed.
NOTE: When installing a new battery, make sure it’s fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery and
result in a shorter life. It can also hinder vehicle performance.
Battery Storage
When the vehicle is placed in storage for three months or more, the battery should be
removed and stored out of the sun in a cool, dry place. Test and recharge the battery
monthly and before reusing.