Location of controls (continued), Indicators on the front panel – Panasonic PV-DM2792 User Manual

Page 9

Advertising
background image

Location of Controls (continued)

Remote Sensor

ANGLE Indicator
Lights up when a scene
recorded at different
angles is detected.
(DVD only).

PROG TIMER Indicator
Lights up when the unit is set for

Timer Recording. It flashes when

a Timer Recording has been set
with no tape inserted, the clock is
not set, or the tape is in motion.
Pg. 30
Lights up when the On Timer is set.
Pg. 26

REC Indicator
Lights up during recording.
In Rec Pause or OTR
Pause mode, the Indicator
flashes.
Pg. 18

Indicators on the Front Panel

Universal Light Tower

®

Illuminated Remote Control

LIGHT button:
When LIGHT is pressed, (DVD,

, DSS/CABLE, CH UP/DOWN, VOL UP/DOWN)

buttons will light for 5 seconds for easy button location.
If no button is pressed in 5 seconds, the light goes out to conserve the battery.

EJECT/OPEN/CLOSE button:
When this button is pressed in TV-VCR mode, the tape is ejected.
This button is inoperative if pressed during recording.
If pressed in DVD mode, the disc tray opens or closes.

9

Initial Setup

Pg. 49

Advertising