Panasonic AG-DVC 200E - Manual (Page 30)

29 (E)
Using the unit with external components
Connection to a PC capable of non-linear editing
By connecting the unit to a PC capable of non-linear editing using a DV cable, the unit can be controlled from the PC and pictures and sound
can be output to the PC.
Select 1394 as the REMOTE SELECT setting on the sub-menu VIDEO OUT screen. Refer to the figure below for the connections. (See
page 34)
DV/IF connector
DV cable
PC
AG-DVC200
To DV
connector
Connection to a video component with a DV connector
The unit can be used as a player by connecting it to a video component equipped with a DV connector using a DV cable. In either case,
refer to the figure below for the connections.
Using the unit as a player
Select 1394 as the REMOTE SELECT setting on the sub-menu VIDEO OUT screen. (See page 34)
The unit can now be controlled from the external video component with the DV connector.
DV/IF connector
DV cable
Video component with DV connector
AG-DVC200
To DV connector
<Notes>
≥ When the unit is connected by cable to an exterior device, set the VTR STBY/SAVE switch to STBY to improve response by the unit.
≥ Further, as this unit is incapable of 1394 input, preview is not possible with some linear boards.