Philips UHP PHI/378 - Manual

Specification sheet UHP Replacement Lamps
Information in this document is subject to change without notice.
Document#: PHI/378-May.28-2008
Page 1 of 3
Philips UHP 100W/120W 1.0 E23
1. Specifications
•
Customer part#:…………………PHI/378
•
Lamp Application:………………..RP-TV
•
Reflector type:…………………...Elliptical E23
•
Arc gap:………………………….1.0 mm
•
Power:…………………………...100W/120W
•
Ignition voltage:………………….Ignition voltage 20kV ± 5kV
•
Light output typical * :…………..4100 lumen (in 120W mode)
•
Average Life time ** :…………...> 6000 hrs
•
Environmental:…………………...RoHS and WEEE compliant
Side and back view of lamp. All dimensions ±0.5mm.
* : Lumen at aperture 4mm on pot
** : Ballast type Test conditions on UHP 120W electronic power supply (EUC-120P/11) stabilized at 120W