Processing flats, packages, or non-letter mail, Printing a single tape strip, Printing multiple tape strips – Pitney Bowes DM400C User Manual

Page 38: 3 • running mail

Advertising
background image

3-8

3 • Running Mail

SV62261 Rev. A

Processing Flats, Packages, or Non-Letter Mail

If your mail piece is too thick to pass through the feeder (non-Letter
size), you can use a tape strip to print the indicia on, then apply it to
your mail piece.

Printing a Single Tape Strip

1. Push the tape lever to the right and drop tapes down into the slot.

i

NOTE:

The printable side of the tape should be facing

towards the control panel display (to the right).

Printing Multiple Tape Strips

i

NOTE:

Ensure the system is confi gured to print multiple tapes.

Refer to Chapter 7, System Options, "Confi guring the Tape
Button" for more information.

•

If the system is ready to print postage and on the Home screen,
simply type in number of tapes you wish to print and press Tape
OR

• Press

Tape

. You will be prompted to enter the tape quantity.

Press Start to begin printing tapes.

2. Press

Tape

when ready to print. By default, a single tape will be

printed.

Advertising