Menu operations, Function menu options – Prima LV-1958P User Manual

Page 25

Advertising
background image

Menu Operations

Function Menu Options

1. Press MENU button and CH+/CH- until the following menu appears on the
screen.

2. Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and
down to select the desired option .

3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved .

Function:

Language: Press VOL+/VOL- button to select language of the OSD.

OSD Timeout: Press VOL+/VOL- to select Middle, Short and Long to change the
time of the OSD display.

OSD Transparency: Press VOL+/VOL- to select among Low, High and Middle
to change the transparency of the OSD. To select Low, the OSD is opacity.

Screen Mode: Press VOL+/VOL- to select among Full Screen, Normal, Wide,
Zoom and Cinema to change the display mode. ( display mode may differ from
different inputs)

Blue Screen: Press VOL+/VOL- to select On , the screen will be in blue after
3 seconds if there is no signal.

DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.

Time Setup: Press VOL+/OK to enter the submenu.

Time Zone: Press VOL+/VOL- to select the appropriate time zone.

Function

Language English

OSD Timeout Short

OSD Transparency Middle

Screen Mode Full screen

Blue Screen On

DPMS On

Time Setup

Closed Caption

Default

Select

Back

EXIT

CH+/-
VOL+/-

Video

Audio

Channel

Lock

Function

Advertising