Registering a handset to a base unit – Panasonic KX-TG8200E/KX-TG8202E User Manual
Page 7
– 7 –
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. When you purchase an
additional handset, refer to the additional handset’s installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
1
"
(centre of joystick) i N i #
2
{^}
/{V}: “
Registration
” i #
3
{^}
/{V}: “
Register H.set
” i #
4
{^}
/{V}: Select a base unit number. i #
5
Proceed with the operation for your model.
N
KX-TG8200/KX-TG8202
Press and hold {x} on the base unit for
about 5 seconds. (No registration tone)
N
KX-TG8220/KX-TG8222
Press and hold {x} on the base unit for
about 5 seconds, until the registration tone
sounds.
6
Wait until “
Enter Base PIN
” is displayed.
i
Enter the base unit PIN (default: “
0000
”).
i
#
#
{x}
{x}
#
TG8200_8220E(e)_QG.fm Page 7 Wednesday, May 30, 2007 6:41 PM