Figure 6.6 – Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Page 197
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
173
Chapter 6: Peripheral Devices & Accessories
Installation
Figure 6.6
3. Securing the RAM Base to the local platform and attach RAM
Standard Arm: Use the supplied bolt hole pattern to drill the required
holes in the local platform. Hole diameters must not exceed 10mm
[13/32 inches]. Hardware (F, L, M and N) for securing RAM Bases (E
or J) to the local platform are recommended sizes. If replacement hard-
ware is required, it should be consistent with these diameters. All fas-
teners must use a suitable locking mechanism to ensure that they do not
loosen under shock and vibration.
•
If you are assembling with RAM Vesa Base, see Figure 6.7 on
page 174.
•
If you are assembling with RAM Circular Base, see Figure 6.8 on
page 175.