Promise Technology 66 Pro - Manual (Page 98)

SuperTrak66™ User's Manual Chapter 5
- 87 -
5.10 Hard Drive Functions
The hard drive icons represent hard drives connected to the SuperTrak66
controller card. The icons will be identified by the drive’s make, model,
status, size, DMA mode, and array configuration.
Hard Drive Information View
Since the hard drives are the last level in the SuperCheck Tree View, the Object
View will not contain any information. Double-clicking on a hard drive icon updates
the Information View with information regarding the particular drive, as depicted
below.
Figure 67: Hard drive Information View
This Information View simply displays information about the drive. None of the fields
may be modified. The field descriptions are as follows:
Disk Model Name
This field shows the make and model of the disk.
Disk Status
This field shows the disk’s operational status.
Disk Size
This field reflects the disk’s total physical capacity.
Mode Setting
This field identifies what transfer mode the disk is set for read/writes
Configuration
This field shows whether the drive is free (“hot spare”) or is assigned to an
array.