Pentax OPTIO A40 - Manual (Page 56)

54
4
Tak
ing Pi
cture
s
(Shake Reduction On) : Appears when you press the shutter
release button halfway with [Shake
Reduction] set to [On].
l (Shake Reduction Off): Always displayed when [Shake
Reduction] is set to [Off].
(Anti-shake warning) : Appears when camera shake may occur
due to slower shutter speed.
Histogram Display
The brightness distribution of the image is
displayed. The horizontal axis shows the
brightness (darkest at the left end and
brightest at the right end) and the vertical axis
shows the number of pixels.
1 Recorded Pixels 2 Quality Level
3 White Balance
4 AE Metering
5 Sensitivity 6 Histogram
Grid Display
The grids divide the screen into nine parts.
These grids will help you to improve
composition.
No icons
No shooting information is displayed.
• The focus frame appears in Autofocus
mode.
• If any of the settings are changed, the icon
of the setting appears for a few seconds.
LCD Backlight Off
The LCD monitor is turned off.
Saving the Display Mode 1 p.122
F2.8 F2.8 F2.8
36 36 36
1/60 1/60 1/60
6
AWB AWB
ISO AUTO ISO AUTO
AWB
ISO AUTO
4 5
2 3 1
12 M