Panasonic DMR-ES15EB - Manual (Page 43)

RQT8320
43
TV System
Change this setting if you connect an NTSC television or to
record NTSC video from another source.
1
While stopped
Press [FUNCTIONS].
2
Press [e,r] to select “To Others” and
press [ENTER].
3
Press [e,r] to select “Setup” and
press [ENTER].
4
Press [e,r] to select “Connection”
and press [q].
5
Press [e,r] to select “TV System”
and press [ENTER].
6
Press [e,r] to select the TV system
and press [ENTER].
• PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are
played as PAL 60.
–Select to record television programmes and PAL
input from other equipment.
• NTSC
–Select when connecting to a NTSC television.
Television programmes cannot be recorded
properly.
–Select to record NTSC input from other equipment.
The confirmation screen appears.
7
Press [w,q] to select “Yes” and press
[ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
n To change the setting all at once (PAL
↔
NTSC)
While stopped, press and hold [g] and [; OPEN/CLOSE] on
the main unit at the same time for about 5 seconds.
Entering text
You can give names to recorded titles, etc.
The maximum number of characters:
Title name for timer recording
If a name is long, parts of it may not be shown in some screens.
1
Show Enter Name screen.
2
Press [e,r,w,q] to select a character
and press [ENTER].
Repeat this step to enter other characters.
• To delete a character
Press [e,r,w,q] to select the character in the name
field and press [h].
• Using the numbered buttons to enter characters
e.g., entering the letter “R”
1
Press [7] to move to the 7th
row.
2 Press [7] twice to highlight “R”.
3 Press [ENTER].
• To enter a space
Press [ ] and press [ENTER].
• Add/recall names (Ô below)
3
Press [g] (Set).
Returns to the previously displayed screen.
To end partway
Press [RETURN].
Text is not saved.
h
g
e,r,w,q
ENTER
Numbered
buttons
RETURN
u,i
SUB MENU
FUNCTIONS
Setup
Tuning
Disc
Picture
TV System
PAL
NTSC
Characters Characters
Title 64 (44 ) Title 44
Playlist 64 Disc 40
Disc 64
Title (timer recording) (Ô page 20, 21, step 3)
Title (Ô page 30, step 3)
Playlist (Ô page 33, step 5)
Disc (Ô page 36, “Providing a name for a disc”)
n To add a name
You can add frequently used names and recall them later.
Maximum number of registered names: 20
Maximum number of characters per name: 20
After entering the name (Ô above, steps 1–2).
1 Press [i] while the name to be added is shown in the
name field.
2 Press [w] to select “Add” and press [ENTER].
To cancel adding word
Press [RETURN].
n To recall an added name
1 Press [u].
2 Press [e,r,w,q] to select the name to be recalled and
press [ENTER].
n To delete an added name
1 Press [u].
2 Press [e,r,w,q] to select the name to be deleted and
press [SUB MENU].
3 Press [ENTER].
4 Press [w] to select “Delete” and press [ENTER].
5 Press [RETURN].
RAM -R -R DL -RW(V) +R +R DL +RW
RAM
-R -R DL
-RW(V) +R
+R DL +RW
_
Enter Name
1 2 3 4 5
A B C a
D E F d
G H I
N O
g
J K L j
M m
6 7 8 9 0
b c
e
f / %
h i $ # &
k l @
n ] _ o [
Space
P Q R S p
T U V
t
W X Y Z w
q r s ( )
u v { } -
x y z
`
|
! ?
\
. , " ' : ;
1
2
3
4
5
6
7
8
9
0
ENTER
SELECT
RETURN
Set
Add to List
Delete
List Names
Name field: shows the text you have entered
Res
et
ti
n
g
ch
an
n
el s
et
ti
n
g
/T
V S
yst
em/
E
n
ter
in
g
t
ext