PowerDsine PD-6548 - Manual (Page 12)

PD-6548
Power over Ethernet Solutions 12 Cat. No.: 06-6860-056
2.3 Indicators
A set of indicators provide the status of the Power over Ethernet Midspan and
its ports. Refer to Table 2-1 and Table 2-2 for status information during
operation.
2.3.1 Primary Power Indicators
A Primary Power LED (labled “AC”) is located on the front panel; the LED
provides Power over Ethernet Midspan power status.
When the indicator illuminates in green, it means that the Midspan receives
AC power. The “AC” indicator lits in orange to indicate Built In test failure.
Refer to Table 2-1: for additional information.
2.3.2 Port Indicators
One uni-color indicator (green) per port provides port status:
„ Green indicates that the PD (Powered Device)
is identified as "Power over Ethernet Enabled",
is active and receives power.
„ Blinking green indicates that the power is not
delivered to a specific port.
Refer to Table 2-1 and Table 2-2 for additional information.
Note Due to the standard detection process performed on
each PoE port, power is not supplied to an Ethernet
device that is not PoE-enabled. In this way, PDs (non
PoE -enabled) are not affected by connection to
Midspan’s output port.