Primera Technology BravoPro Automated Optical Disc Printing System User Manual

Page 31

Advertising
background image

Printing Discs From Windows 27

Enable Ink Low Warning

This setting lets you enable or disable the warning from the

printer to tell you when the ink cartridges are getting low.

Ink Levels and Cartridge Maintenance

Select this button to display the current ink levels as well as

options for cleaning and changing cartridges.
Select the Clean button to send a simple test print pattern to

the printer. Be sure to have a disc in the

input bin

and the lid

closed. This test print pattern purges the ink cartridge nozzles

and lets you know if any one of the Yellow, Magenta, Cyan or

Black nozzles is clogged. If one of these colors does not appear

on the test print, repeat the cleaning procedure. If nozzles still

appear to be clogged, remove the cartridge and gently wipe the

nozzle area sideways with a clean water-dampened cloth. If

after several cleanings a color still does not appear on the test

print, the cartridge may be damaged or empty and may need

to be replaced.
Select the Change button to install a fresh, new ink cartridge or

to switch back and forth between previously used cartridges.

After the cartridge has been replaced according to the

instructions in Section 2, select either the New Cartridge

Installed button or the Old Cartridge Installed button

accordingly. These selections are necessary for the printer to

accurately keep track of ink cartridge ink levels.

Enable Bi-di Printing

When enabled the Bravo will print bi-directional for faster

printing. The default is uni-directional printing. When you

enable bi-directional printing, you should perform the

Alignment Calibration described later in this section. Please

note that the calibration is stored on your computer, so if you

move to a new computer you must do the calibration again.

Disc Output Location

This can be set either Normal (Left Bind), or Kiosk (Front Exit).

The default is Normal (Left Bin). Note that this will only have

an effect when doing printing only − this will have no affect

when doing recording and printing through PrimoDVD.

510685.qxd 4/14/03 3:18 PM Page 27

TOC

INDEX

Advertising