Panasonic DMC-LS2 - Manual (Page 15)

Preparation
15
VQT0V10
The number of recordable pictures in
low temperatures
(In normal picture mode when the
temperature is 0 °C (32 °F) and other
recording conditions comply with CIPA
standard.)
• Please note that the performance of
oxyride batteries and alkaline batteries
significantly decreases in low temperature
conditions.
Playback time
• The number of recordable pictures and
playback time will vary depending on the
operating conditions and how the battery
is stored.
• The number of recordable pictures and
the playback time will also vary depending
on the brand and type of batteries used.
• We recommend using power save mode
(P20) or economy mode (P46) or turning
off the camera frequently while recording
to maintain battery power.
Inserting/Removing
the Batteries
• Check that the camera is turned off and
that the lens is retracted.
• Use oxyride batteries (supplied), alkaline
batteries (optional) or Ni-MH batteries
(optional).
1 Slide the battery door to open it.
2 Insert the batteries with the + and
- poles aligned correctly.
3 1 Close the battery door.
2 Slide the battery door to the
end and then close it firmly.
• Select the battery type being used in
[BATTERY TYPE] in the [SETUP] menu.
(P20)
• Remove the batteries after use.
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately
3 months even if the batteries are removed.
Batteries Used
Number of recordable
pictures
Panasonic Oxyride
batteries (supplied
or optional) Approx. 45 pictures
(Approx. 22 min)
Panasonic Alkaline
batteries (optional) Approx. 35 pictures
(Approx. 17 min)
Fully charged
Panasonic Ni-MH
batteries (optional) Approx. 360 pictures
(Approx. 180 min)
Batteries Used
Continuous playback
time
Panasonic Oxyride
batteries (supplied
or optional) Approx. 420 min
Panasonic Alkaline
batteries (optional) Approx. 410 min
Fully charged
Panasonic Ni-MH
batteries (optional) Approx. 510 min
VQT0V10ENG.book 15 ページ ２００５年１２月２７日 火曜日 午後８時３４分