Parkside PPHSS 730 SE - Manual (Page 7)

6 GB/IE/CY
Jigsaw PPHSS 730 SE
© Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.
© Proper use
The device is suitable for making straight, curved
and bevel cuts in blocks or sheets of plastic, wood
and metal. The device is designed to be used in dry
rooms and for domestic purposes only. Observe the
advice about saw blade types. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. The manufacturer will not accept liability
for loss or damage arising from improper use.
© Features and equipment
1 Pommel grip
2 ON / OFF switch (with stop)
3 Housing
4 Oscillation speed setting wheel
5 Mains connection lead
6 Ventilation grill
7 Dust extraction spout
8 Vacuum extraction duct (see Fig. B)
9 Base plate, light metal
10 Runner (removable)
11 Clamp screw
12 Pendulum action switch
13 Guide roller
14 Saw blade
15 Guide fence openings (with locking screws)
16 Chip guard
17 Contact guard
18 Quick-release chuck
19 Guide fence
20 Allen key
21 Stop pin (see Fig. B)
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual! Safety class II
Observe caution and safety notes!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Caution – electric shock!
Danger to life! Keep children away from electrical
power tools!
Explosive material! For indoor use only!
V~
Volt (AC)
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
W
Watts (Effective power)
Dispose packaging and appliance in
an environmentally-friendly way!