Pioneer PDP-5000EX - Manual (Page 26)

26
En
Basic Adjustment Settings 09
NOTE
• “Standard” is not selectable when 480p or 720p@60 Hz
signals are input.
• “Advanced” is not selectable when PAL, SECAM, 576i, or
1080i@50 Hz signals are input.
• Neither “Standard” nor “Advanced” is selectable when 576p,
1080p or 720p@ 50 Hz signals are input.
Using Color Temp
1
Press HOME MENU.
2 Select “Picture” ( / then ENTER (ENTER/DISP.)).
3 Select “Pro Adjust” ( / then ENTER (ENTER/DISP.)).
4 Select “Color Detail” ( / then ENTER (ENTER/DISP.)).
5 Select “Color Temp” ( / then ENTER (ENTER/DISP.)).
6 Select the desired parameter ( / then ENTER (ENTER/
DISP.)).
• If you have selected a desired parameter in this step,
skip steps 7 and 8.
• You may rather want to perform fine adjustment. To do
this, select “Manual” first and then press and hold
ENTER (ENTER/DISP.) for more than three seconds. The
manual adjustment screen appears. Then go to step 7.
7 Select an item to be adjusted ( / then ENTER (ENTER/
DISP.)).
8 Select the desired level ( / ).
• To perform adjustment for another item, press RETURN,
and then repeat steps 7 and 8.
• You may press / to immediately change an item to
be adjusted.
9 Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
Using CTI
1
Press HOME MENU.
2 Select “Picture” ( / then ENTER (ENTER/DISP.)).
3 Select “Pro Adjust” ( / then ENTER (ENTER/DISP.)).
4 Select “Color Detail” ( / then ENTER (ENTER/DISP.)).
5 Select “CTI” ( / then ENTER (ENTER/DISP.)).
6 Select the desired parameter ( / then ENTER (ENTER/
DISP.)).
7 Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
Using Color Management
1
Press HOME MENU.
2 Select “Picture” ( / then ENTER (ENTER/DISP.)).
3 Select “Pro Adjust” ( / then ENTER (ENTER/DISP.)).
4 Select “Color Detail” ( / then ENTER (ENTER/DISP.)).
5 Select “Color Management” ( / then ENTER (ENTER/
DISP.)).
6 Select an item to be adjusted ( / then ENTER (ENTER/
DISP.)).
7 Select the desired level ( / ).
Selections Off Deactivates the PureCinema.
Standard Produces smooth and vivid moving
images (film specific) by automatically
detecting recorded image information
when displaying DVD or high-definition
images (e.g., movies) having 24 frames
per second.
Advanced Produces smooth and quality moving
images (as shown on theatre screens) by
converting to 72 Hz when displaying DVD
images (e.g., movies) having 24 frames
per second.
Color Temp
Adjusts the color temperature, resulting in a better white balance.
Selections High White with bluish tone
Mid-High Intermediate tone between High and Mid
Mid Natural tone
Mid-Low Intermediate tone between Mid and Low
Low White with reddish tone
Manual Color temperature adjusted to your
preference
Item button button
R High Fine adjustment
for bright
portions For weaker red For stronger red
G High For weaker green For stronger green
B High For weaker blue For stronger blue
PureCinema
R Low Fine adjustment
for dark
portions For weaker red For stronger red
G Low For weaker green For stronger green
B Low For weaker blue For stronger blue
CTI
Provides images with clearer color contours. The CTI stands for Color
Transient Improvement.
Selections Off Deactivates the CTI.
On Activates the CTI.
Item button button
Color Management
0
0
0
0
0
0
Y
R
G
C
B
M