Planar VSS17SX - Manual (Page 18)

17" VitalScreen S 10
QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Orientation/View
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Power Management System
The VitalScreen S display complies with the VESA DPMS standard. This standard
provides four power-saving modes, based on the display detecting the horizontal
or vertical sync signal. The following table describes the four modes.
When the display is in power-saving mode, or when it detects an incorrect timing,
the display screen goes blank and the power LED indicator blinks.
Mode
AC Input Power
(including AC adapter)
LED Status
ON with audio
without audio
40 watts maximum
37 watts maximum
Steady green
Steady green
Standby 5 watts maximum Blinking green
Suspend 5 watts maximum Blinking green
OFF 5 watts maximum OFF