Installations and connections, Installing the ink film – Panasonic KX-PW308DW User Manual
Page 4
44
When the unit runs out of ink film, the following message will be displayed.
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ｺｳｶﾝｼﾃｸﾀﾞｻｲ U23
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ﾋﾝﾊﾞﾝ :KX - FAN190
Install a new ink film.
Installations and connections
Installing the ink film
1
Open the control panel.
2
Open the back cover.
4
If the ink film is slack, tighten it by
winding this gear (orange).
3
Insert the ink film.
Insert the orange
gear into the left slot
of the main unit.
Insert the white gear into the right slot
of the main unit.
5
Close the back cover pressing
“ ” down on both sides
until it clicks into place.
6
Close the control panel.
Replacement ink film:
KX-FAN190 (15 m)
￥714
KX-FAN190W (15 m X 2)
￥1,208
KX-FAN191 (15 m) (*1)
￥893
KX-FAN191W (15 m X 2) (*1) ￥1,523
・As of August 2008.
・Tax included.
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.