Philips HQC281 - Manual (Page 10)

C
3 Remove the metal clip by means of a
screwdriver.
C
4 Open the housing.
C
5 Pull the battery holder out of the
appliance.
C
6 Insert a screwdriver into the small slot in
the printed circuit board marked with an
arrow. Push the screwdriver down until
part of the printed circuit board breaks
off.
C
7 Separate the battery from the plastic part
by means of a screwdriver.
8 Dispose of the battery and the other
components in an environmentally safe
way.
Do not connect the appliance to the mains again
after it has been opened!
ENGLISH
12