Philips FW-C39 - Manual (Page 10)

3139 116 19401
10
English
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
To stop the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
OPERATING THE SYSTEM
STANDBY-ON
FW- C10 MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
TAPE CD TUNER AUX
PRESET ▲ ▲ TUNING ▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
3 CD ROTARY CHANGER SYSTEM •
CD REWRITABLE COMPATIBLE •
CD SYNCHRO RECORDING •
D B B
CDR/VIDEO JOG
CONTROL
SOUND NAVIGATION - JOG VOLUME
PROGRAM DIM RECORD DUBBING A.REPLAY INCREDIBLE SURROUND
CLOCK • TIMER
V E C
D S C
T E C H N O
R O C K
J A Z Z
O P T IM A L
Easy Set
EASY SET allows you to store all available
radio stations automatically.
• Press and hold STANDBY ON (on the
system only) for 5 seconds when the
system is in standby or demonstration
mode.
™ “EASY SET” will be displayed, and
followed by “ TUNER” and then
“ AUTO”.
™ EASY SET will start searching for all
radio on FM band and then followed
by radio stations on MW band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band, if
there are still presets available, the
system will continue to store the MW
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will appear
on the display when EASY SET is
completed.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on the
remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX
IN terminals.
pg 01-24/C38-39/21&/30-En 3/3/00, 4:24 PM 10