Polaris Sprotsman 700 - Manual (Page 107)

105
MAINTENANCE AND LUBRICATION
Adjustments
Toe Alignment (cont.)
2. Place stands in front of the machine, perpendicular to the rear tires.
3. Tie an elastic string around the stands, making sure string just
touches side surface of the rear tires on each side of machine and
goes around the stands in front of the machine.
4. Measure from string to rim at front and rear of front rim. Rear rim
measurement should be 1/16
″ - 1/8″ (.2 to .3 cm) more than front
rim measurement.
5. If this measurement needs to be adjusted, contact your dealer for
service.