Syslog mode – Polycom SpectraLink 1725-36038-001 User Manual
Page 79
Diagnostic Tools
PN: 1725-36038-001_B.doc
79
Syslog Mode
A syslog server must be present on the network in order for the
handset to send the log messages and have them saved. The syslog
server will be found with DHCP option 7 if the handset is using
DHCP. If static addresses are configured, the syslog server’s IP
address can be configured statically in the Admin menu.
If the syslog server address is blank (
000.000.000.000
or
255.255.255.255
) or the handset is using DHCP and no option 7 is
received from the DHCP server, the handset will not send any
syslog messages.
Admin menu options:
•
*
Disabled
– turns syslog off.
• Errors
– causes the handset to log only events that we consider to
be an error (see below).
• Events
– logs all errors plus some other interesting events (see
below).
•
Full
– logs all the above plus a running stream of other quality
information (see below).
The table below lists the syslog messages and which level of logging
will produce them:
Message type
Errors
Events Full
Failed Handoff
Yes
Yes
Yes
Successful Handoff
No
Yes
Yes
Security Error
Yes
Yes
Yes
Call Start/End
No
Yes
Yes
Audio stats
No
No
Yes (every 5 secs)
Audio error threshold exceeded Yes
Yes
Yes
Radio stats
No
No
Yes (every 5 secs)
Radio error threshold exceeded Yes
Yes
Yes
Error Handling Mode
Yes
Yes
Yes