Panasonic VV-1303 - Manual (Page 23)

23 23
Ad
vanced Operation
Auto Operation Functions
Tape Position Display
Press TAPE POSITION to detect current tape
position. 1
DETECT I NG TAPE POS I T I ON
2
■ Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
➞ Power turns off
• This feature is canceled if any button is
pressed during above mode.
■ Auto Playback
Insert a tape in Power off mode
➞ Power turns on
• Playback begins if tape has no record tab.
■ Auto Rewind
Tape reaches its end
➞ Rewind ➞ Stop
■ Playback Auto Eject (Repeat Play is “OFF”)
Tape with no record tab reaches its end
Rewind ➞ Stop ➞ Eject
• “DETECTING TAPE
POSITION” only appears the
fi rst time a cassette is inserted
and it takes several seconds
for correct indication to appear.
• The present tape position
indication is displayed.
Press TAPE POSITION (or wait 5 seconds)
to return to the normal screen.
To fi nd out present tape position.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
BEG I N END
TAPE
POSITION