Connection to a broadband network – Panasonic SC-BT330 User Manual
Page 17
Getting s
tar
te
d
17
VQT2M13
The following services can be used when this unit is connected
to broadband.
≥ Firmware can be updated (> 21)
≥ You can enjoy the BD-Live (> 27)
≥ You can enjoy VIERA CAST (> 34)
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ It may not work properly depending on the equipment or
environment used.
Connection to a broadband network
∫ Using LAN (ethernet) cable
[BT730] [BT330] [BT230]
∫ Using Wireless LAN Adaptor (optional)
A LAN Cable (not included)
B Broadband router, etc.
C LAN Cable (not included)
D Modem (Broadband) *Provided by ISP
A Wireless LAN Adaptor
B Wireless router (Access point), etc.
C LAN Cable (not included)
D Modem (Broadband) *Provided by ISP
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
LAN
AV
OUT
LAN
WIRELESS
RÉSEAU LOCAL
LAN
(10BASE-T/100BASE-TX)
LAN
WIRELESS
≥ Only the Wireless
LAN Adaptor
DY-WL10 (optional)
can be used.
SC-BT230_330_730P_PC_VQT2M13_eng.book 17 ページ ２０１０年３月１６日 火曜日 午後５時５７分