Changing the unit’s settings, Advanced operations, Adjusting the sound lag between speakers – Panasonic SC-BTX70 User Manual

Page 38: Adjusting the speaker level

Advertising
background image

38

RQT9479

Changing the unit’s settings

The surround and surround back speakers will only be displayed when the speakers are connected with the optional Panasonic wireless system
SH-FX70 and the main unit’s settings have been reconfigured in the EASY SETUP. (

> 12)

Delay time (

)

For optimum listening with 4.1/6.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the surround, surround back speakers closer to
the seating position, adjust the delay time to make up for the
difference.
If the distance

B is less than A (D below), find the difference in the

relevant table and change to the recommended setting.

1 Press [

3, 4, 2, 1] to select the distance box (

) and press

[OK].

2 Press [

3, 4] to select the setting and press [OK].

Volume (Channel balance) (

)

(Effective when playing multi-channel audio)
1 Select “Test” and press [OK].

A test signal is output.
Front (L)

—————)Front (R) —————) Surround (RS)

:

;

Surround (LS)

(— Surround back (LB) (— Surround back (RB)

2 While listening to the test signal, press [

3, 4] to adjust the volume

of each speaker.
The volume can be adjusted between

r6 dB to s6 dB.

≥Set each speaker level according to the volume of the Front (L)

and Front (R) speaker volume respectively.

3 Press [OK].

The test signal stops.

≥No signal is output for the subwoofer. To adjust its volume, see

page 18, Adjusting speaker level during play.

To finish the speaker setting

Press [

3, 4, 2, 1] to select “Complete” and press [OK].

Speaker settings
(When the optional surround, surround back speakers are connected.)

Adjusting the sound lag between speakers

ms

0.0

ms

0.0

B

A

: Actual speaker position

Approximate room dimensions

e.g., 4.1ch speaker connection

e.g., 6.1ch speaker connection

Circle of constant primary listening distance

: Ideal speaker position

: Primary listening distance

L

LS

R

SW

RS

RS

LS

B

A

B

A

L

LB

R

RS

SW

RB

RB

RS

LS

LB

A

B

B

LS

: Actual speaker position

Approximate room dimensions

Circle of constant primary listening distance

: Ideal speaker position

: Primary listening distance

B Surround / Surround back speakers

Difference

Setting

Approx. 170 cm (5 ft. 6 in.)

5.0 ms

Approx. 340 cm (11 ft. 1 in.)

10.0 ms

Approx. 510 cm (16 ft. 8 in.)

15.0 ms

ms

L

Complete

Test

LS

R

SW

RS

dB

dB

dB

LB

RB

0

0.0

0

0

ms

dB

dB

0.0

0

0

[LS (L)] Surround [RS (R)]

[LB (L)] Surround back [RB (R)]

Adjusting the speaker level

dB

0

dB

ms

L

Complete

Test

LS

R

SW

RS

dB

dB

dB

LB

RB

0

0.0

0

0

ms

dB

dB

0.0

0

0

Test

Surround back [RB (R)]

Surround

[LS (L)]

Surround
[RS (R)]

[LB (L)] Surround back

≥The test signal is only output from the speakers that were acknowledged during the EASY SETUP.

NOTE

Advanced operations

BTX70PP_eng.book 38 ページ 2009年6月24日 水曜日 午後3時42分

Advertising