Philips VR620/58 - Manual (Page 47)

43
Programming a recording
(without ShowView)
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press TIMER k on the remote control twice . A free TIMER block
will be highlighted.
3
Press TIMER k . The information will appear on the screen.
TIMER
VPS
DATE REP. PROG. START PDC END
21 MO-FR 01 20:00 ] 21:30
________________________________
REP.pSELECT
STOREpOK
4
With TIMER k , P or Q you can select 'DATE' (date), 'PROG.'
(programme number), 'START' (start time) and 'END' (end time).
Enter or change your information with ;qP or P r= , or with the
number buttons 0..9 on the remote control.
Selecting onetime/daily/weekly recordings
In 'DATE' use SELECT to select from the following options:
'ONCE': Recording once
'MO-FR': Repeated daily recordings from Monday to Friday
'WEEK.': Repeated weekly recordings (every week on the same day)
Programme numbers of the ' E1' and 'E2' scart socket
You can also programme recordings from external sources via scart socket
EXT.1 AV. 1 (' E1') or EXT.2 AV. 2 (' E2').
'Switching on 'VPS/PDC' in the 'START' input field
Select the 'START' input field using TIMER k . Using SELECT switch on
'VPS/PDC' (']' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (']' goes out).
5
When all informations are correctly, confirm with OK . The
programming information is stored in a TIMER block.
ENGLISH
Programming a recording (TIMER)