PC Concepts Full-Rated Router ADSL2+ User Manual
Page 99
98
When the system reboots, your connection to the configuration program will be suspended
and may appear to hang. If you want to continue to use Configuration Manager, wait about 30
seconds and Refresh the browser window (e.g., press <F5> if using Internet Explorer). You
may need to log in again.
5.8.10 Management Control
You can enable access to Configuration Manager from the WAN port so that the ISP can
perform configuration tasks.
The table on this page provides a check box to enable or disable HTTP (i.e., Web
browser-based) access to the configuration program through the WAN port. In the Inactivity
TimeOut text box, you can specify a length of time in minutes after which external access will
be blocked, assuming that there is no access during that time.
If you want your changes to be in effect the next time you log in, click Submit.