Panasonic Digital Multi Processors WZ-DM35NH User Manual

Wz-dm35nh, Digital multi processor, 2 inputs and 4 outputs

Advertising
background image

D I G I T A L S I G N A L P R O C E S S O R S

Pattern

Type

Make contact type, No. of control patterns: 12 + MUTE

Control

Anti-reverse diode provided

Connector

D-SUB 15-pin, setscrew M2.6

Recommended connectors

Male: OMRON XM2A-1509 or equivalent

Hood: OMRON XM2S-1511 or equivalent

Power Supply

AC220-240V 50/60Hz

Power Consumption

19 W (as defined in the Electrical Appliances Control Act)

Heat Flow

19 W (15 kcal)* The figure in parentheses is calorific value per hour.

Stacking Conditions

2 units high maximum

* If you are using 3 units or more, leave a space for a unit or more every 2 units.

Dimensions

480 (W) x 44 (H) x 280 (D) mm (without rubber feet)

Weight (approx.)

4.5 kg

Note: "RAMSA-NET" is a protocol exclusive to Matsushita Communication Industrial Co., Ltd.,

used to send and receive data between the host computer and two or more audio control units

connected to it with communication lines.

General Frequency Response

20 to 20,000 Hz, +0.5, –1.0 dB

Dynamic Range

Analog input/output (typ, IHF-A)

115 dB (noise gate ON)

109 dB (noise gate OFF)

THD

0.015% at +4 dB, 20 to 20,000 Hz, 30 kHz LPF (at 600

Ω load)

Crosstalk

–70 dB or less (10 kHz)

User Memory

No. of memories: 16

External Type

RS-485 RAMSA-NET (See Note.)

Control

Connector

D-SUB 9-pin, IN/OUT 1 each, setscrew M2.6

Recommended connectors

Male: OMRON XM2A-0901 or equivalent

Female: OMRON XM2D-0901 or equivalent

Hood: OMRON XM2S-0911 or equivalent

Digital Multi Processor

WZ-DM35NH

2 inputs and 4 outputs.

6 functions: Graphic equalizer function, parametric

equalizer function, delay function, crossover network

function, compressor/limiter function, and noise gate
function.

6 Basic Modes: Three delay modes for sense-of-direction

control (DELAY1 to DELAY3) and three crossover

network modes (X-OVER1 to X-OVER3)

Built-in digital audio interface and conforms to the

AES/EBU format.

24-bit A/D and D/A converters are employed for analog

inputs and outputs to offer a dynamic range close to that
of an analog device.

All settings can be saved in up to 16 patterns in the

memory.

SPECIFICATIONS

Rear Panel

Unit : mm

44

32

480
465

275

5

Dimensions

GEQ

CH PEQ

X-OVER

LEVEL

DELAY

UTILITY

Model No.

WZ-DM35NH

Input

No. of Channels

2 ch

Analog

Type

Electronic balance

Rated Input

+4 dB

Maximum Input

+24 dB or more

Connector

XLR-3-31 or equivalent, 2 connectors

Input Impedance

20 k

In-Phase Reject Ratio

40 dB or more

A/D Converter

24-bit

∆-∑ type

Digital

Type

AES/EBU format, for professional use

Sampling Frequency

48 kHz±0.1%

Connector

XLR-3-31 or equivalent, 1 connector

Output

No. of Channels

4 ch

Analog

Type

Electronic balance

Rated Output

+4 dB±1 dB

Maximum Output

+24 dB or more (at 10 k

Ω load)

Output Impedance

150

Connector

XLR-type connector or equivalent, x4

Applicable Load Impedance 600

Ω or more

D/A Converter

24-bit

∆-∑ type

Digital

Type

AES/EBU format, for professional use

Sampling Frequency

48 kHz

Connector

XLR-3-31 or equivalent, 1 connector

(Recommended cable: Canare Electric DA206 or equivalent)

PUBLIC ADDRESS

RAMSA

Advertising