Polycom VVX 1500 Business Media Phone - Manual (Page 143)

Changing When and How Video Displays Customizing the Phone Display
Polycom, Inc. 137
— To pause and display the current picture only, tap . To display
the pictures one-by-one again, tap .
— To stop displaying the pictures and return to the idle screen, tap .
The pictures will not display again until you access the Picture Frame
feature again (unless you have a screen saver set up, or you enable
one).
— To set the picture that currently displays as the background picture for
your phone, tap .
Changing When and How Video Displays
You can update when and how video displays by doing the following:
•
“Enabling or Disabling Video” on page 137
• “Changing the Clarity of Near-Site Video” on page 141
• “Changing How You View All Video Calls” on page 142
• “Setting the Call Rate for Video Calls” on page 148
Enabling or Disabling Video
You can enable or disable the transmission of near-site video. However, you
cannot enable or disable far-site video. If your phone receives far-site video,
your phone always displays far-site video.
By default, your phone always transmits near-site video, unless you do the
following:
• Stop the transmission of near-site video during a call. See
“Starting and
Stopping Near-Site Video During a Call” on page 139.
• Stop the transmission of near-site video for all calls. See “Enabling or
Disabling Near-Site Video for All Calls” on page 139.
If you stop or disable video, will display next to near-site video.
Note
To remove the six keys from the touch screen, tap the touch screen. To display the
six keys again, tap the touch screen again.