Philips BDP5506/F7 - Manual (Page 11)

EN
EN - 11
3. FUNCTIONAL OVERVIEW
3.1. Front Panel
1. Q (standby/on) button
• Touch to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Touch and hold for 10 seconds to shut down the
unit.
2. B (play) button
• Touch to start or resume playback.
3. C (stop) button
• Touch to stop playback.
4. A (open/close) button
• Touch to open or close the disc tray.
5. Disc tray
• Place a disc after opening the disc tray.
6. Infrared sensor window
• Receives signals from your remote control so that
you can control the unit from a distance.
7. Display panel
• Refer to “Display Panel” on page 14.
8. USB input
• Connect a USB storage device or USB card reader.
C Caution
• Do not connect any device other than USB storage
device or USB card reader into USB input. (e.g. PC,
external HDD, MP3 player, digital camera, keyboard,
mouse, etc.)
• Do not use an extension cord or USB hub to connect
devices to this unit. Always connect one single USB
storage device or USB card reader into USB input
directly.
D Note
• Due to new ENERGY STAR® requirements, this unit
will automatically enter standby mode after 25 minutes
of inactivity.
3.2. Rear Panel
1. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
2. LAN terminal
• Use to connect to network provisioning equipment
such as a router or a modem with a LAN cable.
3. DIGITAL OUT (COAXIAL) jack
• Use to connect an AV receiver / amplifier,
Dolby Digital / DTS decoder or to another device
with a digital audio coaxial input jack with a digital
audio coaxial cable.
4. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
5. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with a video cable.
6. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with an audio cable.
C Caution
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have an RF modulator.
2 1 4 5 8 6 7 3
1 3 2
5 6
4
E5WA0UD_EN_v3.book Page 11 Thursday, March 24, 2011 1:43 PM