Opening the setup menu – Panasonic WV-CL920 User Manual
Page 17
-18-
Note:
If no button is pressed for 6 minutes while the
CAM SET UP menu or any other menu is opened,
the menu is automatically closed and the mode
returns to the normal camera picture.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON (DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
END SET UP DISABLE
↵
↵
↵
Blinking
The CAM SET UP menu appears on the monitor as
shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed description of
menu items. If you decide not to make any changes
after checking the current settings, move the cursor to
END at the start of the bottom line, and press
to
close the CAM SET UP menu and return to normal cam-
era picture mode.
• Opening the Setup Menu
Press and hold down
for 2 seconds or more.