Pioneer Super Tuner III D+ AVH-P7950DVD - Manual (Page 19)

English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
18
• When installing in a shallow space,
use the following screw holes. In
this case, stick concealing tape on
parts that protrude from the dash-
board.
Fig. 19
*2 If the screw holes of the bracket and the
screw holes of this unit are not aligned, use a
file to widen the screw holes of the bracket to
match up the screw holes on this unit.
Tighten the screws at 2 places on each side.
Fig. 20
Installing the remote control unit
When not using the remote control
unit, secure it with the hook and loop
fastner to prevent it from moving.
• Thoroughly wipe off the surface
before affixing the hook and loop
fastner.
Fig. 21
Remote control
unit
Hook and loop fastner
(small) (hard)
Hook and loop fastner
(small) (soft)
Screw
Dashboard or
Console
Factory radio mounting
bracket
*2
*1
Concealing tape