Pentax MZ-60 - Manual (Page 47)

45
B
ASIC OPERA
TION
(PREP
ARA
TION)
B
ASIC OPERA
TION
(SHOO
TING)
AD
V
ANCED OPERA
TIONS
O
THERS
1
Set the main switch to the
ON position, Depressing the
Drive mode button for over
2seconds, Film status
information will
appear on the LCD.
2
Holding the drive mode
button and depress the
shutter release button to
start rewinding.When the
film is fully rewound, only
blinks on the LCD
panel.
• The film will be rewound, Film
status information on the LCD
panel blinks and counts the
frame numbers in reverse.
• Before opening the back cover,
check that is blinking.
REWINDING A FILM IN MID-ROLL
If you wish to unload the film before exposing all the frames, use
this function.
Step 9