Philips - HTS8160B - Manual (Page 36)

34
The contents of a USB device cannot be read.
Ensure that the format of the USB device •
is compatible with this home theatre .
Ensure that the USB device is formatted
•
with a À le system that is supported by
this home theatre (note that NTFS is not
supported).
I do not want my home theatre to be
switched on when I switch on my TV.
This is the correct behaviour for Philips •
EasyLink (HDMI-CEC). To make the
home theatre work independently, turn
EasyLink off (see ‘Enable and disable
EasyLink’ on page 26 ) .
I cannot access BD-Live features.
Check the network connection or • ensure
that the network has been set up (see
‘Connect to the Internet’ on page 14 ) .
• Clear local storage. (see ‘Clear local
memory’ on page 28 )
Ensure that the Blu-ray disc supports BD-
•
Live features.
No sound on HDMI connection.
If the connected device is not HDCP- •
compliant or is only DVI-compatible, you
cannot transmit sound through an HDMI
connection. Use an analogue or digital
audio connection.
Make sure that the
• [HDMI Audio] setting
is turned on.
Play
Distorted sound or echo.
Ensure that the TV volume is muted or •
set to minimum if you are playing audio
through the home theatre.
DivX video À les cannot be played.
Ensure that the DivX À le is encoded •
according to the ‘Home Theatre ProÀ le’
with the DivX encoder.
Ensure that the DivX video À le is
•
complete.
DivX subtitles do not display correctly.
Ensure that the subtitle À le name is the •
same as the movie À le name.
Select the correct character set:
•
1) Press OPTIONS . 2) Select
[Character Set] . 3) Select the supported
character set. 4) Press OK .
EasyLink feature does not work.
Ensure that the home theater is •
connected to a Philips brand EasyLink TV
and that EasyLink is on (see ‘Enable and
disable EasyLink’ on page 26 ) .
‘No entry’ sign appears on the TV.
The operation is not possible. •
EN
1_HTS8160B_98_EN.indd 34 8/12/2009 2:12:48 PM