Panasonic AG-3DA1P - Manual (Page 73)

Displays
73
THE TC MODE IS CHANGED TO "NDF"
NDF is selected as the TC MODE setting.
(Only when SYSTEM FREQ is set to 59.9 Hz)
THIS CARD CANNOT RECORD IN VIDEO
MODE.
The card cannot be used for video recording.
THUMBNAIL DATA ERROR IS DETECTED.
An error has been detected in the thumbnail
information.
TURN POWER OFF
Turn the power off.
U
UNABLE TO FORMAT.
The card cannot be formatted.
USER CLIP NAME MODIFIED
The user clip name you entered has been
modified.
W
WRITE PROTECT
The card is write-protected.
■
■
Main error displays
The following messages are displayed when
an error has occurred in the camera or the SD
Memory Card. If the problem is not solved by
switching the power off and back on again,
either change the card in accordance with the
instructions displayed, or consult the place of
purchase.
C
CANNOT RECORD
Displayed when an error has occurred during
recording.
N
NG
Displayed when an error has occurred with the
camera itself. Start the recording again.
FOCUS NG (error with focus operation)
ZOOM NG (error with zoom operation)
R
REC WARNING
Displayed when an error has occurred during
recording. Start the recording again. If the
message appears again, please consult the
place of purchase.
Please switch the power off if the message
continues to appear.
Please try inserting a different card if the
message appears again after restarting
recording. •
•
S
SYSTEM ERROR
TURN POWER OFF
Displayed when an error has occurred in the
system. Switch the power off and back on
again.
If this error is displayed when accessing
the SD Memory Card, such as when
deleting a clip, the SD Memory Card may
be damaged. Please replace it with a new
SD Memory Card. •
■
■
■
■