Promise Technology FastTrak S150 - Manual (Page 12)

FastTrak S150 TX4 User Manual
8
TX4
FastTrak 150
Figure 2. FastTrak S150 TX4 card
3. Attach the Y-cable power splitters to the Serial ATA hard drives.
Note
The FastTrak S150 TX4 RAID controller is a PCI Plug-n-Play
(PnP) device. No changes are necessary in the Motherboard
CMOS Setup for resources or drive types in most applications.
Port 4 Port 2 Port 1 Port 3
LED Pins
for future
use