Setting the functions (program mode), P.62 – Pentax Optio M50 User Manual
Page 64
62
4
Tak
ing Pi
cture
s
In R (Program) mode, the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Program).
3
Press the 4 button.
4
Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.87 - p.105) for details of how to set the
functions.
5
Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Setting The Functions (Program Mode)
Shutter release
button
Four-way controller
4 button
3 8
3 8
3 8
1 4 : 2 5
1 4 : 2 5
1 4 : 2 5
0 2 / 0 2 / 2 0 0 8
0 2 / 0 2 / 2 0 0 8
0 2 / 0 2 / 2 0 0 8