PYLE Audio FWM352 - Manual (Page 18)

18
English
Radio Reception
Tuning to radio stations
1
Press TUNER to select TUNER mode.
➜ " TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
Press TUNER again to select the desired
waveband : FM or MW.
3
Press and hold à or á until the frequency
indication starts to change, then release.
➜
The display will show "
SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
●
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
1
Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
● Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until " AUTO" is
displayed.
➜
PROG starts flashing.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
● Press PROGRAM or STOP 9 on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
y
CD1/2/3 MUTE
REPEAT PROGRAM SHUFFLE
DSC DBB
DISPLAY DIM SLEEP
TITLE
ALBUM
AUX TUNER
VOL
MHz
TIMER
ON/OFF
pg001-027_M352_22_Eng 2005.12.23, 15:53 18