Id remote control function, Seam hides video setting, 35 set up for multi display – Panasonic TH-37PH10UK User Manual
Page 35
35
SET UP for MULTI DISPLAY
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
2
3
Switch
to
on the right side.
Press the
button on the remote control.
Press one of
-
,
for the tens digit setting.
Press one of
-
,
for the units digit setting.
4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote
control.
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
,
,
buttons at the same time.)
Notes:
• Set the Remote ID “On” to operate the ID remote control.
If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.
(see page 41)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not
the same as the ID select number (see page 41).
ID remote control button operation
The operation is the same as normal remote control except for the
button.
SEAM HIDES VIDEO Setting
Reference
To hide joints between displays.
Suitable for moving image display.
To show joints between displays.
Suitable for still image display.
Step 6, Page 34
ON
OFF