Philips SoundBar HTS6120 - Manual (Page 32)

32
Search and store radio stations
individually
1
Press RADIO.
2
Press / .
It starts searching until a radio station
»
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To fi netune the radio frequency, •
press / .
4
Press PROGRAM.
The preset station number blinks.
»
If no action is carried out within 20
»
seconds after the above step, it exits
the preset mode.
5
Press / (or the Numeric buttons) to
select a preset number to store.
6
Press PROGRAM to confi rm.
Listen to radio
1
Press RADIO.
2
Use the remote control to control the
radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for •
other radio stations remain
unchanged.
Tip
Press • AUDIO SYNC to toggle between FM
stereo and FM mono mode.
Note
If the FM radio station transmits RDS (Radio •
Data System) data, the name of the radio
station is displayed.
Reinstall all the radio stations
1
Press RADIO.
2
Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are
»
replaced.
Note
Check the radio antenna connection if no •
stereo signal is detected or less than 5 stations
are detected during radio installation.
EN