Planet Technology SOHO Internet Telephony PBX System IPX-600 - Manual (Page 10)

2
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of IPX-600
• Network cables. Use standard 10/100BaseTX network (UTP) cables with RJ-45 connectors.
• TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for
WAN port usage)
Administration Interface
PLANET IPX-600 provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
:
To start IPX-600 web configuration, you must have one of these web browsers installed on
computer for management
•
Microsoft Internet Explorer 6.0 or higher with Java support
Default LAN interface IP address of IPX-600 is 192.168.0.1. You may now open your web browser, and
insert 192.168.0.1 in the address bar of your web browser to logon IPX-600 web configuration page.
IPX-600 will prompt for logon username/password, please enter: admin / 123 to continue machine
administration.
Figure3. Input prompt