Panasonic KX-FPC95 - Manual (Page 96)

96
Operations
For fax advantage assistance, call 1-800-435-7329.
A B C
Original Copy
Receive mode
Problem
● If you want to set the TAD/FAX, FAX ONLY or TEL/FAX
mode:
— Select the desired mode using feature #77 (p. 88), and
— Press
to turn on the arrow ( ▼ ) on
the right of the display.
Display:
ON
● If you want to set the TEL mode:
— Press
to turn off the arrow ( ▼ ) on
the right of the display.
ON
● The unit is not in AUTO ANSWER mode. Press
to turn on the arrow ( ▼ ) on the right of
the display.
ON
▼
AUTO ANSWER
AUTO ANSWER
▼
AUTO ANSWER
Cause & Remedy
I cannot select the desired
receive mode.
The other party complains that
they cannot send a document.
Copying
Problem
● You cannot make a copy during programming. Make the
copy after programming or stop the programming.
● The glass or rollers are dirty. Clean them (p. 103).
● The thermal head is dirty. Clean it (p. 104).
● Some paper has instructions recommending which side to
print on. Try turning the paper over. We recommend
smooth paper such as Hammermill
Jet Print for clearer
printing.
● You may have used paper with a cotton and/or fiber
content that is over 20%, such as letterhead or resume
paper. We recommend smooth paper such as
Hammermill
Jet Print for clearer printing. R
R
Cause & Remedy
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied
document.
The copied image is distorted.
The printing quality is poor.
The printing is faint.