Panasonic SC-HT730 - Manual (Page 8)

8
RQT7972
F
ro
n
t sp
eak
er asse
mb
ly
∫ Attaching to a wall
You can attach all of the speakers to a wall.
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
≥Use of optional speaker cables is recommended for wall-mounted front speakers. (You can also remove the speaker cables from the pipes
supplied with this system).
≥[HT930] [HT933] When mounting the front speakers to a wall, we recommend using a string (not included) to prevent it from falling ( ➜ page 7).
∫ Fitting speaker stands
(not included)
(Except Front speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lbs).
≥The stands must be stable even if the speakers are in a high position.
Other speaker setup options
30–35 mm
(1
3 / 16
q–1 3 / 8
q)
‰7.5–9.4 mm
(
19 / 64
q– 3 / 8
q)
4.0–7.0 mm
(
5 / 32
q– 9 / 32
q)
Wall or pillar
‰3.0–4.0 mm
(
1 / 8
q– 5 / 32
q)
e.g.
366 mm
(14
13 / 32
z)
Front speaker [HT930]
In this position, the
speaker will likely
fall if moved to the
left or right. Move the speaker
so that the screw is
in this position.
180 mm
(7
3 / 32
z)
Center speaker
[HT730]
[HT733] [HT930]
Surround speaker [HT730]
175 mm
(6
7 / 8
z)
150 mm
(5
29 / 32
z)
Front speaker [HT933]
230 mm
(9
1 / 16
z)
Center speaker [HT933]
Speaker stand
(not included)
Plate thickness plus 7 mm to
10 mm (plus
9 / 32
q to 13 / 32
q)
Surround speaker [HT730] e.g.
5 mm ( 3 / 16
q),
pitch 0.8 mm ( 1 / 32
q)
Attach the stands to
these metal screw holes.
60 mm (2 3 / 8
q)
7972en-p03-31.fm Page 8 Tuesday, June 7, 2005 1:35 PM