Panasonic BB-HCM580 - Manual (Page 2)

http://panasonic.co.jp/pcc/products/en/netwkcam/
without using SD Memory Card standard image quality with time display
Part Names
BB-HCM581/BB-HCM580
Capture View
Connect
Control
Store
Front View
Rear View
Pan (display range:
360˚max)
Tilt (display range:
158˚max)
Lens
Pan and tilt control
Colour Night View Mode
When the subject darkens, the camera
automatically adjusts the brightness to show you
the image.
Motion Detection Function
This function detects changes by reacting to a
camera threshold or sensitivity that is set in
advance on the PC. Captured images can also be
stored temporarily in the camera* 1 or sent to you
by e-mail* 2 or FTP data transfer* 3 .
*1 A maximum of approximately 350 images (320 x 240 pixels) can
be stored in the camera.
*2 PDP before SMTP
authentication and SMTP
authentication (PLAIN, LOGIN
and CRAM-MD5) are supported.
*3 The sensor's detection history
can also be e-mailed to you
once a day at a preset time.
Achieving Zero Distance Management
with a Variety of Functions
OFF ON
A large number of images can be saved onto an
SD Memory Card inserted into the camera. The
images on the card can be checked over the
Internet, or if no network is being used,
monitoring is possible using only the camera by
simply storing the images onto the card.
*4 The SD Memory Card is sold
separately.
*5 The MPEG-4 recording times will vary
depending on the subject and the
maximum MPEG-4 frame rate (image
refresh speed) and bit rate settings for
image distribution.
Threshold
Enjoy comfortable, versatile monitoring.
Simultaneous MPEG-4 and JPEG
You can make use of your existing equipment.
Analogue Video Output* 8
By connecting a cable directly to the camera's
video output terminal, you can use your existing
TV or video recorder for monitoring. When using
analogue video output, the camera automatically
switches to interlace scanning* 9 to suppress
flicker in motion images.
*8-1 Compatible with both NTSC and PAL systems.
*8-2 A mini video cable (with 3.5-mm mini plug) is required.
*8-3 The camera cannot be controlled when using analogue video
output. The video image displays poorly in colour night view mode.
*9 Images are output to the PC with progressive scanning.
Monitor large areas entirely.
Remote Pan/Tilt and Zoom Control
*11 The zoom function cannot
be used from a cell phone.
The camera angle can be varied by remote
control to monitor large areas. Monitoring
precision can be further increased by using the
42x zoom* 11
(21x optical zoom
and 2x digital zoom).
Specifications [BB-HCM581/BB-HCM580* 1 ]
Video Compression
Video Resolution
Image Quality
Frame Rate*
2
Security
Supported Protocols
User Access Limit
Buffered Images*
4
Image Transfer Method
Image Buffer/Transfer Triggers
Server
42x zoom (21 x optical, 2 x digital)
Tele: 2.6° (optical) / 1.3° (digital), wide: 51°
Tele: 1.9° (optical) / 0.9° (digital), wide: 38°
-175° up to +175°
-120° up to +0° (on a table), 0° up to +90° (on a ceiling)
Pan: max. 300°/sec, tilt: max. 200°/sec
2-Way half duplex
Play with ActiveX
Encoding with ActiveX
ADPCM 32 kbps
300 Hz - 3.4 kHz
External microphone input terminal
Audio line output terminal for external speaker
1/4 inch CCD sensor, approx. 320,000 pixels
Auto/manual (40 steps)
F1.6(wide) - F3.6(tele)
Auto/manual/hold
Auto
2 to 100,000 lux (in Colour Night View mode: 0.09 to 100,000 lux)
Camera
Camera
Horizontal Viewing Angle
Vertical Viewing Angle
Tilt Angle
Sensor Type
Lens Focal Point
Lens Brightness
White Balance
Exposure
Required Light Intensity
Audio
Audio Communication
Audio Play Method
Audio Compression
Audio Bandwidth
Audio Input
Audio Output
Zoom
Pan Angle
Revolving Speed
Audio Encoding Method
Ethernet (10Base-T/100Base-TX)
Input: 2, output: 1
Analog composite (NTSC/PAL)
3.5 mm stereo mini jack (output is mono)
3.5 mm mini jack
Full size (operation guaranteed for 2GB, 1GB, 512MB, 256MB, 128MB and 64MB SD Memory Cards)
Operation: 0°C to +40°C (+32°F to +104°F )
Storage: 0°C to +50°C (+32°F to +122°F)
Operation: 20 % to 80 % (No Condensation)
Storage: 20 % to 90 % (No Condensation)
140 x 123 x 123 mm (5 1/2 x 4 13/16 x 4 13/16 inches )
BB-HCM580: 640g (1.41lb.) BB-HCM581: 650g (1.43lb.)
PoE: 9W (HCM581 only) AC adaptor: 10.5W
General
Temperature
Terminal
Network Interface
External I/O Connector
Video Output*
6
Audio Output* 6
External Microphone Input
SD Memory Card Slot
Dimension (H x W x D)
Weight (Only the Unit)
Consumption
Humidity
*1 The BB-HCM580 does not support audio 2-way communication or the
easy PoE power supply.
*2 The frame rate may slow down depending on the network environment,
PC performance, image quality, SD memory recording, when colour
night view mode is activated, etc.
*3 For MPEG-4 only. Not applicable to JPEG.
*4 The maximum number of frames changes depending on the image
quality and what object you buffer.
*5 PDP before SMTP authentication and SMTP authentication (PLAIN,
LOGIN and CRAM-MD5) are supported.
*6 Use only the included Audio/Video Cable when connecting an external
microphone, speaker or TV.
JPEG (3 levels), MPEG4
640 x 480, 320 x 240 (default), 192 x 144
JPEG (favor clarity, standard, favor motion), MPEG4
Max. 30 frames/sec. (640 x 480*
3 , 320 x 240, 192 x144)
User ID/password
IPv4 / IPv6 Dual-Stack
IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnP
TM ,
SMTP Authentication, RTP, RTSP, RTCP
IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, RTP, RTSP, RTCP
Max. 30 simultaneous accesses
(max. 10 accesses in MPEG-4 mode with sound playback)
Approx. 350 images (320 x 240)
42x
1x
Image Transfer Function
In accordance with preset settings* 10 , the camera
will automatically transfer images and a data log
by e-mail to an e-mail* 2 address or by FTP to a
server.
This allows you to check images only when
necessary, and also prevents you from forgetting
to check them.
*10 Preset settings can include timer, alarm, and motion
detection. With JPEG connection only.
SMTP* 5 , FTP, HTTP
Alarm, timer or motion detection
640 x 480
Resolution
320 x 240
42x Zoom
Cameras simultaneously send MPEG-4 images in
three resolutions (VGA* 6 , QVGA, and SCIF), and
JPEG images in the same three resolutions in
favour motion, standard, and favour clarity
image-quality types.
MPEG-4 is recommended for viewing smooth
motion images, and JPEG is recommended for
recording higher quality images.
Design and specifications are subject
to change without notice.
All pictures simulated.
0.2M0707SDSP-HCM581/580-LT.US
*6 When viewing in VGA, only MPEG-4 playback offers
a maximum of 30 fps.
PoE: 48 V, IEEEE 802.3af-compliant Power over Ethernet (HCM581 only)
AC adaptor (option for HCM581): input 120 V AC, output 12 V DC Power Supply
192 x 144
35 KB/file 16 KB/file 7 KB/file
55,000 images 115,000 images 370,000 images
9 hours 9 hours 17 hours
JPEG
MPEG-4* 5
Format
*The values in the table are all approximate. [image quality:Standard]
2GB SD Memory Card Recording Capacity
MPEG-4 Visual License
*7 For JPEG only. The audio feature does not work on cell phones.
image resolution:
192 x 144 or 320 x 240
PC
Recommended type
Cell phone* 7
Narrow band:MPEG-4
High quality recording:JPEG
MPEG-4
JPEG
MPEG-4
JPEG
Internet
JPEG
Mic
Mic
Network camera
Speaker
Speaker
Internet
How does the sales
corner look?
Let's make the
aisle a little wider.
PC
SALE
SALE
Head office
Supermarket
When installing the MPEG-4 viewer program on additional PCs,
please purchase additional licenses (Model No. BB-HCA5A for USA,
BB-HCA5CE for others).
LAN port I/O connector
DC IN jack Audio/video
terminal*
SD Memory
Card slot
Indicator
*Video terminal only for BB-HCM580.
Audio 2-Way Communication* 12
By using a separately purchased microphone and
speaker, you can speak* 13 to someone near the
camera while monitoring. This gives you more
precise communication to lessen the
inconvenience of being in a distant location.
*12-1 The audio feature does not work with cell phones.
*12-2 Not supported by the BB-HCM580.
*13 Walkie-talkie type conversation.
SD Memory Card* 4 Recording