Pioneer KEH-P2800R - Manual (Page 3)


,QVWDOODWLRQ
1RWH
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.
Installation with the rubber bush
Removing the Unit
30˚
182
53
1
2
3
4
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
then select the appropriate tabs according to
the thickness of the dashboard material and
bend them.
(Install as firmly as possible using the top
and the bottom tabs. To secure, bend the tabs
90 degrees.)
3. Rubber bush
4. Screw
5
5. Insert the supplied extraction keys into the
unit, as shown in the figure, until they click
into place. Keeping the keys pressed against
the sides of the unit, pull the unit out.