Peerless Industries A100IWBMOUNT - Manual (Page 13)

ISSUED: 04-08-08 SHEET #: 055-9094-2 06-06-08
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.
13 of 16
Place projector arm (C) onto projector tube (B) as shown in fig. 11.1. Align projector arm (C) so that the holes in
projector tube (B) are in the middle of projector arm (C) slot. NOTE: This can be adjusted during final projector
alignment if needed. Fasten projector arm (C) to projector tube (B) using two #10-32 x 3/8" serrated washer head
socket pin screws (O) as shown in fig. 11.2 and detail 6.
O
11
B
C
C
B
fig. 11.1
fig. 11.2
DETAIL 6