Panasonic IP8840 - Manual (Page 24)

IP8840 Broadworks IP Phone
User Guide
19 Dec. ‘08
08:30
SNTP Server Address
clock.via.net
Å Mode OK
08:30
Time Zone
>*(GMT-08:00)PACIFIC STANDAR
(GMT-07:00)MOUNTAIN STANDA
(GMT-06:00)CENTRAL STANDAR
(GMT-06:00)MEXICO CITY, ME
(GMT-06:00)SASKATC. CANADA
(GMT-05:00)BOGOTA, COLOMBI
(GMT-05:00)EASTERN STANDAR
Previous Next OK
5.6. Time Configuration
Within the Time Configuration menu, the IP Address or name of the desired Simple Network Time
Protocol (SNTP) server and the local time zone are defined. In addition, Daylight Savings Time (DST) is
enabled. Consult with your administrator before changing the SNTP server.
5.6.1. SNTP Server Address
SNTP (Simple Network Time Protocol) is a standard protocol that permits a network device to obtain the
network’s current time. For operation with SNTP, the IP8840 IP Phone requires an SNTP server IP
address or name.
To assign the SNTP server address:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous - Next softkeys and press the
OK
softkey.
o Dial 6, or move the cursor to 6.Time Configuration using the Previous - Next softkeys and press
the
OK
softkey.
o Dial 1, or move the cursor to 1.SNTP Server Address using the Previous - Next softkeys and
press the
OK
softkey.
o Input the SNTP server address using the dial pad and
press the
OK
softkey to save the entry. To enter
alphanumeric characters select the
Mode
softkey. Refer
to Appendix A for the character mapping of dial pad digits.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to
exit the configuration session.
5.6.2. Time Zone
For proper operation of the clock, the IP Phone requires the local time zone. For available time zones,
see Appendix B Time Zones
To enter the Time Zone:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK softkey.
o Dial 6, or move the cursor to
6.Time Configuration
using the
Previous
-
Next
softkeys and press
the OK softkey.
o Dial 2, or move the cursor to
2.Time Zone
using the
Previous
-
Next
softkeys and press the
OK
softkey.
o An asterisk, », displays in front of the current selection.
Select the nearest region from the display using the
Previous
-
Next
softkeys and press the
OK
softkey to save
the entry.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to
exit the configuration session.