Panasonic DMR-E80H - Manual (Page 37)

37
RQT6984
Edit
ing
The lock symbol appears
closed when the disc is
write-protected.
Press [
2
] to set disc
protection and press
[ENTER].
[Note]
≥ Computer data and still pictures (JPEG, TIFF) cannot be
erased.
≥ Erase does not work if one or more programs are protected.
Press [ 2 ] to select
“Start” and press
[ENTER].
DISC SETTING
RETURN
ENTER
SELECT
Prog # 7
Used Total Mark
Free
10 0 : 58
0 : 42 (SP)
Disc Protection
Enter Title
On
Format
Erase all programs
[Note]
≥ Do not disconnect the AC power supply cord while the
message “Finalizing the disc” is on the television. This will
render the disc unusable.
≥ Finalizing takes up to 15 minutes.
After finalizing..
≥ You cannot record or perform editing such as giving titles
and erasing programs.
≥ Video content will be split into 5 minute chapter segments if
the longer than 5 minutes in length.
≥ There is a pause of several seconds between program segments.
≥ The markers you entered ( ➜ page 22) will be lost. However, when
the “DVD-R compatible Rec” setting is set to “On” ( ➜ page 44) and
the recorded program is being dubbed from the HDD using the high
speed mode markers are treated as chapter cutoff points.
≥ These DVD-R can be played on other Panasonic DVD players, but
this is not guaranteed. Play may not be possible due to the player
you are using, the DVD-R, or the condition of the recording. Play the
disc using this unit if you experience problems with other equipment.
Visit Panasonic’s homepage for more information about DVDs.
http://www.panasonic.com/playDVD-R
[Note]
≥ Do not disconnect the AC power supply cord while the
message “Formatting the disc” is on the television. This
can render the disc unusable.
≥ Formatting normally takes a few minutes, however it may
take up to a maximum of 70 minutes.
≥ The contents on the disc are erased when you format it even
if you have set program or disc protection.
[RAM]
≥ It may not be possible to use a disc on this unit if you cannot
format it.
≥ Formatting cannot be performed on DVD-R or CD-R/RW.
To stop formatting [RAM]
Press [RETURN].
You can cancel formatting if it takes more than 2 minutes. The
disc must be reformatted if you do this.
Press
[ENTER]
to complete
the procedure. Press [
2
]
to select
“Yes” and
press
[ENTER].
Press
[ENTER]
to complete
the procedure. Press [
2
]
to select
“Yes” and
press
[ENTER].
Press [
2
] to
select “Start” and
press [ENTER].
Formatting starts.
≥ A message appears when
formatting is finished.
Press [
2
] to
select “Start” and
press [ENTER].
Finalizing starts.
≥ A message appears
when finalizing is
finished.
Press [
2
] to
select “Yes” and
press [ENTER].
All programs
and play lists
are erased.
Press [
3
,
4
,
2
,
1
] to select the
background and press [ENTER].
DVD