Panasonic KX-PW508DW - Manual (Page 4)

44
Installations and connections

When the unit runs out of ink film, the following message will be displayed.
ﾌｨﾙﾑなし U23
交換してください
品番：ＫＸ－ＦＡＮ190
Install a new ink film.
Installing the ink film
1
Open the control panel.
2
Open the back cover.
4
3
Insert the ink film.
If the ink film is slack, tighten it by
winding this gear (orange).
Insert the white gear into the right slot
of the main unit.
Insert the orange
gear into the left slot
of the main unit.
5
Close the back cover pressing
“ ” down on both sides
until it clicks into place.
6
Close the control panel.
Replacement ink film:
KX-FAN190 (15 m)
￥714
KX-FAN190W (15 m X 2) ￥1,208
KX-FAN191 (15 m) (*1) ￥893
KX-FAN191W (15 m X 2) (*1) ￥1,523 ・As of October 2008. ・Tax included.
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.